Idemsa, S. A.

Description:

Watts Series N170 hot water master tempering valves are especially designed for use on larger hot water supply systems for mixing hot and cold water for a variety of applications to extend the hot water supply. This series uses paraffin-based thermostat to sense and adjust outlet temperature.

Features:

• ASSE 1017 and IAPMO CUPC Listed
• N170-M3 uses paraffin-based thermostat to sense and adjust outlet temperature
• Dirt and lime resistant poppet and seat design
• Virtual shutoff if supply pressure fails
• Vandal-resistant locking mechanism to secure temperature setting
• Factory tested

Specifications:

Maximum Operating Pressure 					125psig (861 kPa)

Maximum Hot Water Temperature 				200°F (93°C)

Minimum Hot Water Supply Temperature		5°F (3°C) Above Set Point*

Temperature Adjustment Range**				90 - 180°F (32 - 82°C)

Hot Water Inlet Temperature Range			120 - 180°F (42 - 82°C)

Cold Water Inlet Temperature Range			40 - 80°F (4 - 27°C)

Listing										ASSE 1017, IAPMO CUPC

Approval Standards							ASSE 1017, CSA B125.3

* With Equal Pressure
** Low Limit cannot be less than the cold water temperature. For best operation, hot water should be at least 5°F (3°C) above desired set point.

Capacity:

Flow Capacity at 50-50 mixed Less Checkstops
			Pressure Drop Across Valve
Model	Inlet / Outlet (NPT)	Min. Flow to ASSE 1017	CV	5psi (34 kPa)	10psi (69 kPa)	20psi (138 kPa)	30psi (207 kPa)	45psi (310 kPa)	60psi (414 kPa)
3/4" N170-M3	3/4 x 3/4"	3 gpm 11 lpm	6.70	15 gpm 57 lpm	21 gpm 79 lpm	30 gpm 114 lpm	37 gpm 140 lpm	45 gpm 170 lpm	52 gpm 197 lpm
1" N170-M3	1 x 1"	4 gpm 15 lpm	10.13	23 gpm 87 lpm	32 gpm 121 lpm	45 gpm 170 lpm	56 gpm 212 lpm	68 gpm 257 lpm	79 gpm 299 lpm
1 1/4"N170-M3	1-1/4 x 1-1/4"	4 gpm 15 lpm	14.16	32 gpm 121 lpm	45 gpm 170 lpm	63 gpm 238 lpm	76 gpm 288 lpm	95 gpm 360 lpm	110 gpm 416 lpm
1 1/2"N170-M3	1-1/2 x 1-1/2"	5 gpm 19 lpm	15.65	35 gpm 134 lpm	49 gpm 185 lpm	70 gpm 265 lpm	86 gpm 326 lpm	105 gpm 397 lpm	121 gpm 458 lpm
2" N170-M3	2 x 1-1/2 x 2"	7 gpm 26 lpm	18.63	42 gpm 159 lpm	59 gpm 223 lpm	83 gpm 314 lpm	102 gpm 386 lpm	125 gpm 473 lpm	144 gpm 545 lpm

Flow Capacity at 50-50 mixed with Checkstops
			Pressure Drop Across Valve
Model	Inlet / Outlet (NPT)	Min. Flow to ASSE 1017	CV	5psi (34 kPa)	10psi (69 kPa)	20psi (138 kPa)	30psi (207 kPa)	45psi (310 kPa)	60psi (414 kPa)
3/4" N170-M3 CSUT	3/4 x 3/4"	3 gpm 11 lpm	6.26	14 gpm 53 lpm	20 gpm 76 lpm	28 gpm 106 lpm	34 gpm 129 lpm	42 gpm 159 lpm	48 gpm 182 lpm
1" N170-M3 CSUT	3/4 x 1"	4 gpm 15 lpm	9.54	21 gpm 79 lpm	30 gpm 114 lpm	43 gpm 163 lpm	52 gpm 197 lpm	64 gpm 242 lpm	74 gpm 280 lpm
1 1/4"N170-M3 CSUT	1-1/4 x 1-1/4"	4 gpm 15 lpm	13.42	30 gpm 114 lpm	42 gpm 159 lpm	60 gpm 227 lpm	74 gpm 280 lpm	90 gpm 341 lpm	104 gpm 394 lpm
1 1/2"N170-M3 CSUT	1-1/4 x 1-1/2"	5 gpm 19 lpm	14.9	33 gpm 125 lpm	47 gpm 128 lpm	67 gpm 254 lpm	82 gpm 310 lpm	100 gpm 379 lpm	115 gpm 435 lpm
2" N170-M3 CSUT	1-1/4 x 2"	7 gpm 26 lpm	17.89	40 gpm 151 lpm	57 gpm 216 lpm	80 gpm 303 lpm	98 gpm 371 lpm	120 gpm 454 lpm	139 gpm 526 lpm

Dimensions:

Model	Body Inlets NPT	Checkstop Inlets NPT	Body Outlet NPT	Dimensions																		Weight
				A		B		C		D		E		F		G		H		J
				in.	mm	in.	mm	in.	mm	in.	mm	in.	mm	in.	mm	in.	mm	in.	mm	in.	mm	lbs.	kgs.
3⁄4 N170-M3	3⁄4	N/A	3⁄4	N/A		41⁄2	114	N/A		31⁄2	89	N/A		17⁄16	36	35⁄8	92	47⁄8	124	215⁄16	75	4.8	2.2
3⁄4 N170-M3 CSUT	N/A	3⁄4	3⁄4	91⁄4	235	41⁄2	114	117⁄16	291	31⁄2	89	113⁄16	46	17⁄16	36	35⁄8	92	47⁄8	124	215⁄16	75	9.8	4.5
1 N170-M3	1	N/A	1	N/A		49⁄16	116	N/A		31⁄2	89	N/A		17⁄16	36	35⁄8	92	47⁄8	124	215⁄16	75	4.8	2.2
1 N170-M3 CSUT	N/A	3⁄4	1	101⁄8	264	49⁄16	116	129⁄16	319	31⁄2	89	113⁄16	46	17⁄16	36	35⁄8	92	47⁄8	124	215⁄16	75	10.3	4.9
11⁄4 N170-M3	11⁄4	N/A	11⁄4	N/A		61⁄16	154	N/A		37⁄16	87	N/A		13⁄4	44	311⁄16	94	51⁄4	133	41⁄2	114	9.4	4.3
11⁄4 N170-M3 CSUT	N/A	11⁄4	11⁄4	121⁄16	306	61⁄16	154	151⁄16	383	37⁄16	87	21⁄2	64	13⁄4	44	311⁄16	94	51⁄4	133	41⁄2	114	19.3	8.8
11⁄2 N170-M3	11⁄2	N/A	11⁄2	N/A		61⁄16	154	N/A		37⁄16	87	N/A		13⁄4	44	311⁄16	94	51⁄4	133	41⁄2	114	9.1	4.1
11⁄2 N170-M3 CSUT	N/A	11⁄4	11⁄2	131⁄4	337	61⁄16	154	161⁄4	413	37⁄16	87	21⁄2	64	13⁄4	44	311⁄16	94	51⁄4	133	41⁄2	114	19.8	9
2 N170-M3	2 (Hot) 11⁄2 (Cold)	N/A	2	N/A		67⁄16	164	N/A		33⁄16	81	N/A		21⁄16	52	37⁄8	98	53⁄8	137	41⁄2	114	10.4	4.7
2 N170-M3 CSUT	N/A	11⁄4	2	133⁄4	349	67⁄16	164	163⁄4	425	33⁄16	81	21⁄2	64	21⁄16	52	37⁄8	98	53⁄8	137	41⁄2	114	21.3	9.7